Sodium Chloride PVD Salt manufacturer,Exporter and supplier.
CAS number 7647-14-5 Y
PVD Salt (Pure Vacuum Dried Salt)
odorless, white color free flowing crystals Solution with water will be transparent
85% between 200 to 600 micron Sodium Chloride 99.6% Min on dry basis
%uF0B7 Total calcium salt as Ca by mass Maximum 0.04 %
%uF0B7 Total Magnesium salt as Mg by mass Maximum 0.04 %
%uF0B7 Total Sulfates as SO4 by mass Maximum 0.1 %
%uF0B7 Matter insoluble in water by mass Maximum 0.05 %
%uF0B7 Iron compound as Fe Maximum 5 ppm
%uF0B7 Non Caking agent Maximum 10 ppm
%uF0B7 Alkalinity as Na2CO3 Maximum 500 ppm
%uF0B7 Bulk density 1300 Kg/m3
%uF0B7 Moisture Maximum 0.1 %
%uF0B7 PH of 10% solution 7.5
%u2022 Drilling Mud:
Oil well drilling is often through rock salt strata, and saturated brine is used in the drilling fluid to preserve the core intact. Mud formulas sometimes contain starch, the properties of which are destroyed by fermentation. Salt is added to prevent this.
%u2022 Chemical Industries:
The greatest salt consumption is for direct and indirect chemical uses as a chemical raw material.
%u2022 Water Treatment:
Commercial and residential water softening units use salt to remove the ions causing the hardness.
%u2022 Food Processing:
From sanitation point the biggest problem in food-grade is rust but PVD Salt has not this problem due to use special alloy equipment. In addition, metal can catalyze oxidation reaction such as rancidity and color or vitamin loss, the metal content in our PVD Salt very low as per the standard of food and chemical codex.
%u2022 Metal Processing
%u2022 Pulp and Paper Industry
%u2022 Tanning and Leather Treatment %u2022 Pharmaceutical
%u2022 Ceramic Manufacturing
%u2022 Detergent Manufacturing
%u2022 Detergent Manufacturing %u2022 De-icing
Note: This article uses material from the http://rxmarine.com/