dvr Seacleaner- org

SeaClean manufacturer and supplier at all Indian – Middle East coastal PORT.  Seaclean is highly effective solvent based emulsified cleaner. RXSOL enhance its property by addition of water softner to gives optimum result with seawater also.
Degreaser and Tank Cleaner Specially formulated for cleaning of oily Greasy Surface and cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms, Industrial platform, Rigs platform etc..


Seaclean pronounced as C Clean plays very important role in ship cleaning and as a deck engine maintenance chemicals. Its high concentration formula effectively removes soot deposits and oily greasy residue from marine maintenance and engine area. Expert claims Stock of seaclean on ship Lower maintenance cost and down time. Its universal degreasing effect solve all degreasing  and cleaning querry on ship.

Technical Specifications:


Dosage Chart for Rock and Roll Cleaning
Fuel Oil Viscositry Centistokes at 50°C RXSOL-20-2055-025 / 1000 Ltsof water  
  1st Stage 2nd Stage
Over 320 and sludge tanks 1 litre 1 litre
150 – 300 1 litre 0.75 litre
Up to 50 0.5 litre ….
COLOUR Light brown liquid  
DENSITY In g/cm3 at 15°C: 0.9  
FLASH POINT Above 70 °C  
PACKAGING RXSOL-20-2055-025 Size (in litres)
20 , 25 , 35 , 210.

This product is an effective  liquid blend of  concentrated emulsifier with penetrating agents as solvent and wetting agents which makes this an excellent  liquid scouring cleansers  for cleaning and degreasing of double bottom, deep tanks etc which is  used for fuel oils It can also be used for BOILERS , MARINE DIESEL ENGINE COOLING WATER SYSTEM  and for local cleaning and degreasing of engine rooms  on deck.

During Tank cleaning operation Double Bottom Tanks. Time, temperature and mixing agitation of cleaning solution plays the very important role for tank cleaning.

Seaclean principally designed to emulsify oil grease deposits either from the component or any metal surface area. As its composition is based on strong oil emulsifier surfactant.  coastline getting the advantage of our product to maintain there machinery parts degreasing action. Our various range of products includes OSD – Oil Spill Dispersant, ACC-9 Air cooler cleaner, Carbon Remover, Degreaser, Tank Cleaner, Activate Alumina, Activated carbon etc…


Seaclean classifed as one of best Degreaser Tank cleaner in marine oil field and shipping industries. Seacleaner also very effective for removal of heavy crude oil, soot, ashpalt and carbon black stains etc.
Highly concentrated emulsified Seaclean makes emulsion with water, which makes one of popular economical cleaner. And its white emulsion effectively dissolve oily greasy matter without any harashement on metal surface and personnel.

Using Procedure:

Soak Method :
for heavy soil put parts into undiluted RXSOL-20-2055-025, for general soiling use a solution of 10-30% RXSOL-20-2055-025 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method :
Use neat RXSOL-20-2055-025 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method :
Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all  heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water, 
3) Close  all suction and discharge valves .
4)1st Dose  Fill the tanks by ½ to 1 litre RXSOL-20-2055-025 per tone of     water   through pipe or manhole , for 
    75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this
    temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect
   tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of RXSOL-20-2055-025, fill tank with sea water 75-80% capacity and raise the
   temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.



Highly effective concentrated cleaner .

  • Versatile, can be used for a wide application range ( for TANK or general cleaning .)
  • Provides quick and thorough emulsifying action.
  • Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
  • May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
  • It can be used as a general purpose cleaner to remove oil and grease deposits  and cleaning of bilge spaces and engine rooms from soiled surfaces.
  • Can be used for degreasing and cleaning engine cooling water systems

Read the Material Safety Data Sheet before using this product

Note: This article uses material from the