dvr Multi Purpose Renovate Industrial Cleaner

A highly concentrated multi-surface, heavy duty industrial cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. Renovate Industrial Cleaner contains a unique non-caustic, solvent-free formula designed to penetrate and lift carbon, soot, smoke, grease, rubber and deeply ingrained soils.



Irritating to eyes.For professional and industrial use only.Keep out of the reach of children.Avoid contact with skin and eyes.In case of contact with eyes rinse immediately with plenty of water and seek medical advice.Wear suitable gloves.Please consult the Safety Data Sheet before using this product.This product is intended for professional use only. The information given is intended to be of assistance to users but is without guarantee. Variations can occur in application and users are advised to conduct their own tests. Suggestions for use neither give nor imply any guarantee as to the intended use.


Renovate Industrial Cleaner is a solvent-free, heavy duty restoration cleaner for the removal of dry soot, carbon, fire residues, filtration soils and draught marks on carpets, fabrics and other surfaces.
%u2022 Highly effective pre-spray on polypropylene carpets.
%u2022 Can be used in conjunction with Colour ‘Safe Bleach OxiBrite’ ( ) Part No. – RXSOL-41-8731-025
%u2022 Cationic solvent-free formula %u201Cpulls out%u201D soils by neutralising electrical charge.
%u2022 Deodorises on application.
%u2022 Red liquid with floral fragrance.
pH Concentrate: 12
pH Diluted: 10.5

Using Procedure:

Normal soil:
Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50).
Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20).
Ceiling cleaning: Add 50ml ‘Safe Bleach OxiBrite’ ( ) Part No. – RXSOL-41-8731-025,  per 5 litres of Renovate Industrial solution. (Observe cautions below).

Pressure washing: 
Mix 1 part Renovate Industrial Cleaner with 4 parts water and meter at desired setting.Always pre-test surface in an inconspicuous area before proceeding. Do not use on water sensitive fabrics, unsealed wood, aluminium or other delicate surfaces.Apply by sprayer, sponge or floor machine. Allow 2 to 5 minutes contact time for heavy soil, scrub if needed, then rinse surface thoroughly with clean water.  Observe all safety precautions. ear suitable personal protective equipment and cover all sensitive furnishings.

Note: This article uses material from the