
Engine room and deck cleaning and degreasing chemical which is very effective to dissolve oil grease deposits and spill parts. All ingredients are biodegradable and safe to the person handling it. Pleasant citrus odour and its uniqueness make it Enviro Safe cleaner for Marine and shipping industries.
Generic Name:
Engine Room and ship deck cleaning Degreaser Enviroclen
Information:
Enviroclean specified marine ship deck engine cleaning chemicals and degreaser. We are supplier and exporter of enviroclean in Mumbai, Kandla Deen dayal Port, Mundra, Surat, Manglore, Chennai – Ennore, Vizag – Visakhapatnam, Kolkata – Haldia, Paradip, Fujairah – Dubai.
Technical Specifications:
PRODUCT PROPERTIES |
Environmentally safe . |
Highly effective Water-based degreaser. |
Appearance: |
Orange liquid |
Ingredients are all biodegradable |
Flash point: |
(PMCC)°C: None |
Non-flammable , Pleasant citrus odour. |
Density: Compatibility: |
In g/cm3 at 15°C: 1.0 |
Highly cost effective concentrated cleaner Very economical dilution rate, 1 to 15 parts of water. |
Metal: Rubber: |
No known effect No known effect |
Can be used as Accommodation cleaner for bulkheads, decks and toilets. Compatible on most types of plastics and vinyls floor |
PACKAGING: |
ENVIRO CLEAN Size (in ltr |
, RXSOL-20-3001-02525 / 210 Lts |
Remarks:
Application:
TANK and BILGE CLEANING : RXSOL-20-3001-025 is recommended for any of the standard tank cleaning methods including ship motion , pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.
Using Procedure:
Application-METHOD
(DoseRate)
BY WASHING MACHINE | : | For direct injection into tank This will require a solution strength between 0.03 and 1.5%, (0.3-15 lts per thousend lts of wash water). |
BY RECIRCULATION METHOD | : | Working strength should be 0.05 and 1% ( 0.5%u201310 Ltres per ton wash water ) by weight in fresh water , based on capacity of the equipment . This solution can be re-used until no longer effective. |
Spot cleaning | : | RXSOL-20-3001-025 can be hand sprayed neat or diluted up to 5 parts water and allow 15 to 20 minutes contact time to penetrate deposits . Finally wash off with water jet . The best results will be obtained when wash water is heated to 40-60°C. |
Note: This article uses material from the http://rxmarine.com/