bookmark Drain Opener No Odor (Power Plunger)close
Obtain an empty mayonnaise jar, and enough Crisco, or bacon grease to fill jar up 1/3 of the way.
Add water to Crisco or bacon grease so jar in now 2/3 full. Add enough Power Plunger to raise contents of jar by 2 inches.
Within 10 to 15 minutes, the product will turn grease into a soft liquid material.
Power Plunger is much safer to use that acid products, and will not harm pipes or pipe joints.
…..
bookmark Drain Fat Cleanerclose
Dosage:
Grease Trap
Seeding: 1.5 litres/m3 (volume of grease trap).
Maintenance dosage is based upon the number of meals daily prepared and served on site:
o 400-500 meals/day: 400 ml/day (minimum dosage rate)
o 800 meals/day: 650 ml/day
o 1000 meals/day: 800 ml/day
o 1500 meals/day: 1.2 l/day
o 2000 meals/day: 1.5 l/day
Rx Mareine International advise the use of RXSOL-15-1057-05 in conjunction with an automatic dosi…..
bookmark Drain Cleaner Alkalineclose
OTHER NAME : BLOCKED PIPE CLEANER, PIPE-CLEAN, DRAIN PIPE CLEANER
Super action powered beads go directly to the point of stoppage, liquefying and clearing fats, grease, sludge, food residue, hair, coffee grounds and other organic matter which Stops sewage odor and overflow
EXOTHERMIC which attains boiling temperature quickly, which is very effective to dissolve the blockage. Opens sewer lines fast!
Its Alkaline nature makes Harmless to pipes & septic tanks
Its dual mechanism Provides dee…..
bookmark Drain Pipe Cleanerclose
DIRECTIONS FOR USE
1. For professional use only.
2. Read the label and MSDS carefully before use.
3. Wear appropriate protective clothing, gloves and eye/face protection.
4. DO NOT MIX WITH BLEACH or other cleaning chemicals.
5. Do not apply if the toilet/drain is overflowing. Remove excess fluid where appropriate.
6. Assess where the likely source of the blockage is. If the drain is totally blocked with no flow and the blockage is too far away, Blockbuster would not be an ap…..
bookmark Drain Pipe sewer Cleanerclose
A plumbing detergent designed to dissolve clogs pipes. Dissolves everything except glass or metal without damaging the piping.
Directions for Use and Dose Rates :-
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that th…..
bookmark Drain Cleaner (BIO)close
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used. If the …..
bookmark Aqua Break RX 20 Ltrclose
WHY RXSOL-16-3003-020 is better ?
An economical highly concentrated product.
Compatible with oily water separators.
Releasing the oil phase for reclamation.
Suitable for all types of floors. Deodorizing nature.
Eliminates the need to buy & stock duplicate products because of its effectiveness.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal
…..
bookmark Aqua Break RX 25 Ltrsclose
Method of Application and Doses:-
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate the system with RXSOL-16-3003-025 Solution
1.
Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).
2.
Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..
bookmark AQUA Tuff High Foam conc.close
Cleaning agents used in Aquatuff for hold cleaning solution is fully biodegradable and not be harmful to the marine. Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..
bookmark Sulfamic Acid Descaler Cleanerclose
Packing of Sulphamic acid ( NH2SO3H or H3NO3S )
Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request.
Advantages of using Sulphamic Acid
Sulphamic Acid has very high shelf life.
Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.
Sulphamic acid has very high effectivity of the descaling.
Complete cleaning can be chemically achieved by Sulphamic acid and does not r…..
bookmark Potable Water Test Kitclose
Features
%u2022 pH Tester and Buffer Kit
%u2022 Chlorine Ampoule Test Kit, including color comparator
%u2022 Coliform Test Kit, including UV lamp and safety goggles
%u2022 Convenient Carrying Case
Benefits
%u2022 Monitors pH level of drinking water to ensure pH level supports chlorination.
%u2022 Monitors the level of free chlorine in the drinking water.
%u2022 Monitors presence/absence of total coliforms and E.coli.
%u2022 Provides for safety of crew
…..
bookmark Hydrocarbon Remover Hcfclose
Using Procedure:-
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2008-HCF is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-
Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at lea…..
bookmark Slip Coat RXSOL HOLD BLOCK 50 Ltrclose
This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.
Other Valuable Hold Cleaners :::
Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can…..
bookmark Toilet Bowl Urinal Cleaner Disinfectant Gelclose
Allow this product to remain for at least 10 minutes until all rust, scale and deposits are loosened. Rinse by flushing. Use a germicidal cleaner for the seat and outside areas – do not use this product on any surface outside the commode or urinal. To clean and disinfect both toilet bowls and urinals – first, remove standing water by forcing it up and over the trap area with swab mop. Wring excess water out of the swab mop and saturate with bowl cleaner……
bookmark Bentonite Powderclose
Bentonite can be Broadely classified in 2 grades :
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..