Currently browsing: Wrench & Tools

Concertina Barbed Wire

single wire high density  Barbed wire
Thickness of main wire                                              : 3.05mm+/-0.05mm         
Thickness of Barbed wire                                          : 2.03mm+/-0.05mm       
 Points                                                                            : 4 Points                   
 Length of points                                                           : 15mm+/- 1…..

Read more

Barbed Wire Galavanized

2 strand 4 points barbs
75mm-100mm spaing
COATING  : ( for rust protection) 

Lightly  Galvanized                   : for farming / genral purpose
Heavy Galvanized                     : for salt weather 
Plastic Coated                          : for extra long life 
 Size Range
                        2.0mm & 2.4mm Galvanized 
                        2.6mm & 3.2mm Plastic Coated
                        Bright Galvanized & Plastic Coated…..

Read more

Razor Wire ( Chemically Treated )


single wire high density  RAZOR wire

Thickness of main wire

Thickness of RAZOR

Sharp BLADE Points

Length of points
25mm+/- 1mm

Main wire, Galvanized coating weight
140 – 180 grams par m2

RAZOR  BLADE, Galvanized coating wt
30 – 50 grams par m2

Main wire, tensile strength
140kgs/m2  density

Barbed wire, tensile strangth
30 – 50kgs/m2 density

Distance batween RAZOR( pointes)
50mm+/- 3mm

Length of ma…..

Read more

MinCream Rx

Future & Benefit

Removes grease, grime, oils, soil, gasket cement, epoxies, glues and inks.

Cleans without water.

Contains biodegradable surfactants.

Won't clog drains.

Contains glycerin and lanolin to keep hands smooth.

Pleasantly scented

Cream formulas may be self dispensed or used with problem-free, push type dispenser.

Leaves hands smooth, not sticky.

Withstands multiple freeze/thaw cycles.

Read more

Aqua Break RX 25 Ltrs

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution


Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     


Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..

Read more

AQUA Tuff High Foam conc.

Cleaning agents used in Aquatuff  for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..

Read more

Bentonite Powder

Bentonite can be Broadely classified in 2 grades :
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..

Read more

Resuscitate Acid Cleaner

Cleaning of equipment such as pasteurizers, sterilizers and evaporators by removal of salts, lime and rust spots. Also it renews the appearance of ceramic tile, porcelain tile, grout, granite, slate, and sandstone. It is also biodegradable and emits fewer vapors than typical acid cleaners. …..

Read more

Methanol Water Mix

Methanol Reformer Fuel Specification : The First Element Methanol Reformer fuel mixture is 66% Methanol / 33% Distilled Water on a volumetric basis. The mixture is prepared in a blend tank of suitable volume. The selected blend tank must be thoroughly cleaned and free of all contaminants. Ensure the mixture is sufficiently blended to produce a homogeneous mixture. …..

Read more

Truck Wash Brightener

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.
Can be applied by brushing or high pressure spray wash.
Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.
Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.
Do not permit solution to dry on surface, rinse completely and preferably by …..

Read more

TRUCK Mounted Cleaner Descaler

Dilutions rates recommended : 
Light Duty Cleaning      : 500 Gram  : 4 Ltrs WATER
Normal Cleaning           :  1 Kg  : 4 Ltrs WATER  15 minutes  or  Time duration can be increased up to 45 minutes for Heavy deposit cleaning.
Heavy Duty Cleaning    : 1 Kg  : 4 Ltrs WATER   15 minutes…..

Read more


For cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. These two steps are followed:
High Molecular mixture of CATIONIC and ANIONIC surfactant, to react with all oil and grease molecule



Spray directly on area to be cleaned



With high-pressure clean entire emulsified area

Due to high emulsification & penetration objects achieves optimal cleaning results.
Due to repulsion activity fore aft-Rx preventing dirt from reformin…..

Read more

Degresol High Flash Point Degreaser

It must be applied concentrated . May be applied to the surface by brush or spray, agitate stubborn deposits if required with a brush and wipe away residues with clean cloth.

RXSOL-16-1009-020 can also be use in dip tank applications.  
Heavily soiled components may require agitation with a brush.
RXSOL-16-1009-020 preferably use in open or sufficiently ventilated areas. RXSOL-16-1009-020should always be used concentrate (without mixing with other solvent.)
For best results apply with eit…..

Read more