Currently browsing: Cooling Water Chemical

Scale and Corrosion Inhibitor for Cooling Water

Handling : Do not breathe vapours or spray mist. Avoid contact with skin and eyes. . Provide sufficient air exchange and/or exhaust in work rooms. Avoid exceeding of the given occupational exposure limits. Smoking, eating and drinking should be prohibited in the application area. Normal measures for preventive fire protection.
 

Storage : Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Stable under recommended storage conditions. Protect…..

Read more

scale corrosion inhibitor Open – closed cooling systems

RXSOL-40-RXSOL-40-4022 is a versatile molybdate-organophosphonate blend of scale and corrosion inhibitors for open recirculating cooling water systems. RXSOL-40-4022 is designed for systems with corrosive water (low hardness and/or low alkalinity). RXSOL-40-4022 will provide protection over a wide range of operating parameters.
 
 It's pH booster mecahanism raise pH to provide additional corrosion protection.is a versatile molybdate-organophosphonate blend of scale and corrosion inhibitors fo…..

Read more

RXSOL 4000

More about Water Boiler Treatment & Powder / liquid Inhibitors

scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture

By using this corrosion inhibitor / oxygen control the build up of sediment deposits and damaging corrosion of water boilers is greatly reduced. Our research and experience recomend  to working water boilers at a rate of 0.5 to 1.0 percent of the weight of water in the system. This am…..

Read more

RXSOL Altreat 400

RXSOL Altreat 400 scale inhibitor is a polycarboxylic acid that controls inorganic scale formation. Small amounts of this copolymer, based on maleic acid, effectively handles large quantities of dissolved salts, thus preventing precipitation,settling and baking onto heat transfer surfaces. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces.RXSOL Altreat 400 readily dissolves in any type…..

Read more

RXSOL ORG 7914 ( BIOCIDE ALGAECIDE)

Initial Dosage: When the system is just noticeably fouled, slug 50- 150 ml  RXSOL ORG 7914 Biocide  Algaecide for each 4000 Ltrs of water in the system to provide a concentration of 16%u201340 ppm of  RXSOL ORG 7914 Biocide  Algaecide . Repeat until control is achieved.
Subsequent Dosage: Subsequent additions of 15-150 ml of RXSOL ORG 7914 Biocide  Algaecide per 4000 Ltrs of water (4%u201340 ppm) should be employed on a continuous basis through use of the RXSOL Wholesaler Drip Feeders. Use 1/6 of a gal…..

Read more

RXSOL ORG – 16 (Condenser Water Scale & Corrosion Inhibitor)

RXSOL ORG – 16 (Condenser Water Scale & Corrosion Inhibitor)  is intended for use in industrial open cooling water systems.  It can be used in an alkaline treatment program or in conjunction with acid for pH control.  This product is particularly recommended for use in systems having very high heat transfer rates and high operating temperatures……

Read more

Safe Acid Descalex 20 kg

Characteristic:
-Powder product-safe and easy handling and storage.   
-Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
-protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent . 
-Colour indicator shows solution strength.
-Removes scale from boilers.                                                                                                 
-Removes scale from Diese…..

Read more

Potable Water Corrosion Inhibitor Pol

Application and Use

Potable Water Tanks

RXSOL-40-4094-025 can  be slug dosed or fed to the tank with a  beta metering system. Dose 0.42 liters of RXSOL-40-4094-025 per 10 tons of water to achieve 42 ppm. This dosage will give approximately 12 ppm of SiO2.

NOTE: Water treated with RXSOL-40-4094-025  should not be used in boiler systems.

Permanent Fresh Water Ballast Tanks

The recommended initial dose is 32 ppm silica. To achieve this, dose 1.1 liters of RXSOL-40-4094-025 per 10 tons o…..

Read more

Rocor NB Liquid With Indicator 210 Ltr

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment……

Read more

RXSOL 2000 – 20 Ltr

In cases where systems are contaminated with oil and/or scale they should be cleaned before starting to apply RXSOL 2000 .There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL 2000-I and descaling by using RXSOL 2000-I.
SPECIFICATION / HANDLING
Color                           : Odour Pink/ red (Colour changes of the product can not be excluded the effectively will however not impaired.)
Sp. Gravity                  : 1.1 to 1.25
pH  …..

Read more

RXSOL 2000 -210 Ltr

In cases where systems are contaminated with oil and/or scale they should be cleaned before starting to apply RXSOL 2000 .There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL 2000-III and descaling by using RXSOL 2000-III.
SPECIFICATION / HANDLING
Color                           : Odour Pink/ red (Colour changes of the product can not be excluded the effectively will however not impaired.)
Sp. Gravity                  : 1.1 to 1.25
…..

Read more

RXSOL 2100

Future & Benefit :

Liquid product, easy to use.

By forming an oxide film on the metal surfaces electrolytic corrosion is prevented.

Effective against cavitation and erosion.

Compatible with hoses, gaskets and seals.

Simple control tests by RXSOL Test Kit and

Effective over a wide range of treatment levels

Does not adversely affect lubricating oils equipment life  reduces maintenance.

Keeps engines free from heat-absorbing sludge and mineral scale deposits prevents over…..

Read more

MICRO BIOCIDE Cooling Water 210 Ltr

RXSOL-40-4009-210 should be dosed periodically at a rate of 75 – 150 ppm of the total system volume. In a badly fouled system an initial dosage rate of up to 250m1/m3 may be required which can be reduced once control is gained.In order to comply with Health & Safety recommendations RXSOL-40-4009-210 should be alternated with another non-oxidising or oxidizing biocide. It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use……

Read more