single wire high density RAZOR wire
Thickness of main wire
Thickness of RAZOR
Sharp BLADE Points
Length of points
Main wire, Galvanized coating weight
140 – 180 grams par m2
RAZOR BLADE, Galvanized coating wt
30 – 50 grams par m2
Main wire, tensile strength
Barbed wire, tensile strangth
30 – 50kgs/m2 density
Distance batween RAZOR( pointes)
Length of ma…..
2 strand 4 points barbs
COATING : ( for rust protection)
Lightly Galvanized : for farming / genral purpose
Heavy Galvanized : for salt weather
Plastic Coated : for extra long life
2.0mm & 2.4mm Galvanized
2.6mm & 3.2mm Plastic Coated
Bright Galvanized & Plastic Coated…..
single wire high density Barbed wire
Thickness of main wire : 3.05mm+/-0.05mm
Thickness of Barbed wire : 2.03mm+/-0.05mm
Points : 4 Points
Length of points : 15mm+/- 1…..
We also keeping other grades of Phosphate Chemicals and Formate Chemicals. Our product range covers high-quality products and most competitive price,
Phosphoric Acid 75%,85% food grade
Polyphosphoric Acid 105%,115%
Phosphorus acid 98.5%,99…..
Each application requires a different water quality. In general cation resin for water softening and demineralization may last 5 to 10 years. Anion resins used in demineralization last anywhere from 3 to 5 years and are dependent on operational conditions. Like every other resin, the life of mixed bed resin is dependent on the application in which it is being used. Resin life is difficult to predict; in critical applications it's best to start analyzing and benchmarking the resin at least once…..
Mixed Bed resins, a mixture of cation and anions are used as polishers to obtain low conductivity water. Typically, low conductivity water is required for bolier feed for high pressure boilers, electronics, electrical discharge cutting machines and pharmaceutical applications.
Mixed Bed can also be used as a primary deionisation unit when the inlet salt is low. Mixed Beds also find applications in process industry where demineralization of pH sensitive products is to be carried out.
Mixed Bed Re…..
Typical dose rate: 100 – 500ppm (0.1 – 0.5 litre/m3 of water) In a multistage bilge water cleaning system, Bilge Water Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.