RXSOL-20-2013-210 can be used for similar applications where a more concentrated product is required., Especially formulated for tank cleaning where Hydro Carbon Free techniques are employed to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter .It is free from hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.
COMMON NAME : H C F REMOVER
A very strong low foaming cleaner, Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is free from Hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2013-210 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.
Note:- Completely miscible with sea water.
Keep Container tightly closed. And before using of this product refer our MSDS to avoid any critical problem.
HCF CLEANER is Neutral product and popular for removal of cargo residues and before loading pure chemicals.
HCF cleaner easily and effectively emulsifying all vegetable and animal fats and oils, and light mineral oils, dry or not This product is suitable to use when strong alkaline cleaners are not recommended for particular tank cleaning due to tank condition / nature. Otherwise this product is more effective then HCF http://www.rxmarine.com/lac-heavy-duty-alkaline-veg-animal-oil-fat-cleaner
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-HCF is by direct injection followed by recirculation washing, using tank cleaning machines.
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2013-210 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:- Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying HCF**
Injection Method%u2013 not applicable.
Re-circulation Method%u2013 Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
** Use a strainer at the pump stack when circulating any solution.**
Tank Lining%u2013 Stainless / Epoxy / Phenolic / Zinc-silicate.
HCF Remover MSDS and Technical bulleting available on mail request ::: email@example.com , RXSOL brand HCF Remover is very popular in Oil and Ship tank cleaning field. We are manufacturer of HCF Remover and having stock point in Mumbai, Navi Mumbai, JNPT, Pirpav, Goa, Manglore, Surat, Gandhidham, Sikka, Mundra, Kakinada, Visakhapatnam, Gangavaram, Ennore, Chennai, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Middle East, Gulf. Our strong stock point given us to hold no-1 supplier position of HCF Remover. Our RXSOL brand HCF Remover also listed as exporter for turkey and Singapore.
Note: This article uses material from the http://rxmarine.com/