dvr Hydrazine Hydrate 200 Ltr

No oxygen is entering the boiler with the feed water when hydrazine is present in the water.
 

The objective is to maintain a hydrazine residual between 0.05-0.2 ppm depending on operating pressure and boiler designe. Actual consumption is determined under operating conditions.  A normal dosage is approximately 1 ltr. per day, depending of system layout.

Hydrazine is a convenient reductant because the by-products are typically nitrogen gas and water. Thus, it is used as an ANTIOXIDANT, an oxygen scavenger, and a corrosion inhibitor in water boilers and heating systems. 

Hydrazine is mainly used as a foaming agent in preparing polymer foams. 

No oxygen is entering the boiler with the feed water when hydrazine is present in the water.

Technical Specifications:

 

HYDRAZINE HYDRATE

Test

Results

Appearance

Colourless and clear

Sulfate : as SO4

0.0001% max.

Chloride : as Cl

0.0001% max.

Iron : as Fe

0.00005% max.

Heavy metals : as Pb

0.0001% max.

Non volatile matter

0.005% max.

Assay : N2H4H2O (as N2H4)

80.19% (51.32%)

Note: This article uses material from the http://rxmarine.com/