dvr Rig Wash Tuff Heavy Duty

It is a heavy duty non corrosive concentrated cost effective surfactant solution used for surface cleaning applications. This cleaning compound is soluble in fresh and salt water , also suitable with high presure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.

 

Technical Specifications:

Physical State: Liquid
Color: Clear blue
Odor: Slight Alcohol
pH: 9.5
Specific Gravity @ 20 C (Water=1): 1.025
Density @ 20 C (kg/l): 1.025
Bulk Density @ 20 C (kg/m3): Not Determined
Boiling Point/Range (C): > 100
Freezing Point/Range (C): Not Determined
Pour Point/Range (C): Not Determined
Flash Point/Range (C): Not DeterminedMin: > 104
Flash Point Method: COC
Autoignition Temperature (C): Not Determined
Flammability Limits in Air – Lower (g/m3): Not Determined
Flammability Limits in Air – Lower (%): Not Determined
Flammability Limits in Air – Upper (g/m3): Not Determined
Flammability Limits in Air – Upper (%): Not Determined
Vapor Pressure @ 20 C (mmHg): Not Determined
Vapor Density (Air=1): Not Determined
Percent Volatiles: Not Determined
Evaporation Rate (Butyl Acetate=1): Not Determined
Solubility in Water (g/100ml): Soluble
Solubility in Solvents (g/100ml): Not Determined
VOCs (g/l): Not Determined
Viscosity, Dynamic @ 20 C (centipoise): Not Determined
Viscosity, Kinematic @ 20 C (centistrokes): Not Determined
Partition Coefficient/n-Octanol/Water: Not Determined
Molecular Weight (g/mole): Not Determined
Decomposition Temperature (C): Not Determined

Application:

For use of general degreasing of engine rooms, rig platform,  cargo hold, refrigerated rooms etc.  Also Removes dirt, oil and grease from equipment, parts, components, engines and industrial floors and walls.
It can be used with either hard or soft water.

%u2022 Cleans rig floors and equipment
%u2022 Degreases shop floors
%u2022 Disperses in petroleum-based fluids and solubilizes in water

 

Using Procedure:

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.

Heavy Soil deposition :::: Use Undiluted from to 20-50% diluted with water. Apply full strength to remove thick deposits of oil and grease, varnish, floor wax, and to wash rig floor and equipment.

Medium soil deposition ::::     10-20%  diluted with water.
Use in 1:5 dilution with kerosene for solvent wash tanks and to clean mechanical parts.
Light Soil ( general degreasing ) :::::  5-10% diluted with water. Use in 1:10 dilution with water for general purpose cleaning.

 

Note: This article uses material from the http://rxmarine.com/