Metallic corrosion and scale controlling advanced formulated product for open and closed cooling systems. A blend of phosphonate, and polymers incorporating dispersants. It is designed for the prevention of hardness deposition in recirculating or once through cooling systems using moderate to high hardness make-up water . Rxsol Scale and Corrosion Inhibitor is scientifically formulated from a combination of polymers to offer excellent calcium along with general scale inhibition in cooling water systems, even under extreme system conditions. Rxsol Scale and Corrosion Inhibitor is made up of halogen stable polymers that do not form insoluble calcium salts when added to hard waters.
|Boiling Point||: 100 °C|
|Freezing Point||: 0 °C|
|Solubility In Water||
The target dosage range is 3 – 5 ppm as PO4-3 in the recirculating cooling water.
Rxsol Scale and Corrosion Inhibitor should be fed continuously to an area of good mixing. The product may be fed directly or may be diluted with good quality water and fed from a chemical dosing tank.
Appropriate use of Rxsol Scale and Corrosion Inhibitor following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
Phosphonate Drop test – Thorium Nitrate titration
Phosphonate UV photolysis + colour disc
Handling : Do not breathe vapours or spray mist. Avoid contact with skin and eyes. . Provide sufficient air exchange and/or exhaust in work rooms. Avoid exceeding of the given occupational exposure limits. Smoking, eating and drinking should be prohibited in the application area. Normal measures for preventive fire protection.
Storage : Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Stable under recommended storage conditions. Protect from frost.
Note: This article uses material from the http://rxmarine.com/