dvr RXSOL PCS

RXSOL PCS (Coal / Lime Remover) is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains and discoloring after discharge of cargoes such as pet coke, coal, lime and other oily type cargoes.. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective

It is special  blend of synthetic detergents and holding agents to increase its effectiveness on vertical surface.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.
 

 

 

 

 

Technical Specifications:

PROPERTIES

RXsol PCS (Coal Remover) is a concentrated liquid solution containing powerful surface%u2013 active agents, a corrosion
inhibitor and aqueous chemical agents.
Appearance / Color : Clear, light yellow liquid.
Specific gravity         : 1.1%u20131.2 gr/cm3 at 20°C
pH                              : 11.5%u201312.5

 

Remarks:

SAFETY AND HANDLING

HANDLING

:

Handle with care. Store in a dry, cool and well ventilated environment.

Eye Contact

:

Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.

Skin Contact

:

Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention.

Inhalation

:

Do not breathe gas/vapors. Otherwise, seek fresh air source at once. Seek medical attention. In case of insufficient ventilation, wear suitable respiratory equipment.

If Swallowed

:

Ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention.

GENERAL

INSTRUCTIONS

:

Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use.

RXSOL PCS is specialized Coal and its satin Removing ship hold cleaning chemicals. Its innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage area. Also Developed for cargo hold cleaning to remove stains and discolouring after discharge of cargoes such as pet coke, coal, lime and other oily type cargoes.. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

As we observed that RXSOL PCS cleaning property increases effectively when its solution is blended with Aquatuff Cleaner.  Aquatuff cleaner have unique Alkaline Detergent formulation, its detergency and PCS coal removing properties enhancing cleaning results of coal stain surface. 

As coal releasing Oil stain on hold surface and due to presence of Sulphur in coal its residue have and acidic properties also. So cleaning of COAL and Its stain required alkaline nature and good detergency effect cleaner. 

PCS + Aquatuff resulting optimum result during COAL CLEANING process.

Application:

%u2022 Effectively removes, Coal Carbon, pet coke and mineral &  lime deposits from cargo holds and tanks.
%u2022 Can also be efficiently used as a general purpose cleaner to eliminate bad odors in tanks and other closed systems.
%u2022 Acts quickly and thoroughly.
%u2022 Can safely be used on all metals and metal alloys (even if painted/varnished).
%u2022 Non%u2013flammable, non%u2013toxic, non%u2013conductive & non%u2013volatile.
%u2022 Soluble in seawater and fresh water.
%u2022 No known effect on rubber or plastic compounds.
%u2022 May be combined with a specific range of other products.
%u2022 Cost effective, easy to apply and use.
 

Using Procedure:

Rxsol PCS (Coal / lime Remover) may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,Rxsol PCS (Coal Remover). can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of Rxsol PCS (Coal / lime Remover) is sufficient to cover a surface area of 8%u201310 square meters.

NOTE ::: — Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

 

Note:

A  water based heavy duty alkaline cleaner for removal of oily stains as pet coke and coal. Also contains a specialized blend of synthetic surfactants which allow for more cling time to cargo hold surfaces.

 

The cleaning should take place as soon as discharge is complete to maximize  effectiveness.

Also effective on dried oil films. When cleaning from black oils to white oils and from black oils to cargo grain

Barrier chemicals can sometimes be effective when applied prior to loading, but should never be used unless time allows them to dry completely.

Note: This article uses material from the http://rxmarine.com/