Wire Rope Lubricantmore_vert

Read More arrow_forward

bookmark Wire Rope Lubricantclose

Light-bodied oil · provides the ability to penetrate to the core of wire rope · wire ropes are cleaner and easy to inspect · penetrates the interstices between wires and strands · high film strength · prevents wear · resists oxidation and corrosion · self-healing film former · excellent in acid or alkali and pollutants%u2019 environment · high polarity promotes creeping and re-lubrication of areas forced dry of oil.

                                                        Major Applications

Fiel…..

Moly Greasemore_vert

Read More arrow_forward

bookmark Moly Greaseclose

Lithium MOLY Grease provides protection to moving parts under very severe shock load conditions, resists water washout and gives long service life.

Lithium MOLY Grease is recommended for chassis fittings, wheel bearings, grease cups, grease lubricated universal joints and other lubrication points in passenger cars, trucks, buses, farm tractors, mobile construction as well as earth moving machinery.

It is also suitable for industrial applications where lithium base grease with molybdenum is…..

Lithium Greasemore_vert

Read More arrow_forward

bookmark Lithium Greaseclose

Lithium MP Grease offer effective lubrication within a working temperature range of -20 oC to + 130 oC. It is recommended for lubrication of plain and anti-friction bearings used in the industry and automobiles.

Lithium MP Grease provides a cost effective lubrication film between moving surfaces for extended intervals and are easily pumped through hand pump or centralized greasing systems. Lithium MP Grease find applications in steel plants, heavy engineering units, textile mills, chemical u…..

CARDIUM LUBRICANTSmore_vert

Read More arrow_forward

bookmark CARDIUM LUBRICANTSclose

RXSOL Cardium Lubrication Compound EP are recommended for use in open gears and cane bearings operating with high loads and low speeds. They may also be used for lubrication of wire ropes.
Performance Features

* Strongly adhesive and resistant to water washout

* Excellent Load carrying Capacity

* Good corrosion resistance…..

Bearing Grease for Wheelmore_vert

Read More arrow_forward

bookmark Bearing Grease for Wheelclose

Wheel Bearing Grease is recommended for wheel bearings and various other automotive grease applications which are not exposed to moisture. It is recommended for open type bearings on paper mill dryers, cement mill kin dryers and crushers, locomotive axle bearings, calendaring machine bearings etc.

Product Features

High dropping point

Non corrosive to iron, and steel

Good metal adhesion properties

 …..

Safe Scale Remover with Indicatormore_vert

Read More arrow_forward

bookmark Safe Scale Remover with Indicatorclose

Safe Scale Remover with colour Indicator – Red to Yellow
RXSOL-22-2210-200  is mixed with fresh water 3 to 20 percent ( 3 Ltr to 100 Ltr water ) depending on deposition of scaling.
The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 5-40% of RXSOL-22-2210-200 in water. Keep in …..

Aqua Break RX 20 Ltrmore_vert

Read More arrow_forward

bookmark Aqua Break RX 20 Ltrclose

WHY RXSOL-16-3003-020 is better ?

An economical  highly concentrated product.
Compatible with oily water separators.
Releasing the oil phase for reclamation.
Suitable for all types of floors. Deodorizing nature.
Eliminates the need to buy & stock duplicate products because of its effectiveness.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal
 …..

Aqua Break RX 25 Ltrsmore_vert

Read More arrow_forward

bookmark Aqua Break RX 25 Ltrsclose

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..

AQUA Tuff High Foam conc.more_vert

Read More arrow_forward

bookmark AQUA Tuff High Foam conc.close

Cleaning agents used in Aquatuff  for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..

Bentonite Powdermore_vert

Read More arrow_forward

bookmark Bentonite Powderclose

Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..

Natural Blue Biodegradable cleaner and Degreasermore_vert

Read More arrow_forward

bookmark Natural Blue Biodegradable cleaner and Degreaserclose

Storage and Handling :

Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container. Rx Marine International cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is…..

Methanol Water Mixmore_vert

Read More arrow_forward

bookmark Methanol Water Mixclose

Methanol Reformer Fuel Specification : The First Element Methanol Reformer fuel mixture is 66% Methanol / 33% Distilled Water on a volumetric basis. The mixture is prepared in a blend tank of suitable volume. The selected blend tank must be thoroughly cleaned and free of all contaminants. Ensure the mixture is sufficiently blended to produce a homogeneous mixture. …..

Hand Cleaner Paste, Waterless 1 Kg Pkgmore_vert

Read More arrow_forward

bookmark Hand Cleaner Paste, Waterless 1 Kg Pkgclose

Avoid contact with wounded skin
Super tough premium industrial waterless hand cleaner gel , uses orange / lemon  peel extract , effectively remove wet paint, printing inks, greases, Oil, Adhesives, grime, Carbon black, glue and several other to remove most stubborn Hand cleaner manufacturer and exporter from India , for Wholesaler and Trader  Greaseless, waterless hand cleaner. ; Fresh orange / lemon scent; Contains no petroleum distillates to dry out skin Hand Cleaner Gel is not flammable and…..

Hand Cleaner Soil Remover Heavy Dutymore_vert

Read More arrow_forward

bookmark Hand Cleaner Soil Remover Heavy Dutyclose

Private labeling option : This bulk packing is suitable for PRIVATE LABELING OPTION, for our big dealer. 

We are manufacturer of various grade of Hand Cleaners. Our day to day production experience more then decade given us leader position as Hand Cleaners suppliers through various chain of our distributor.  Our distributors private labeling plans help them to share market as Hand Cleanersproducers. Our global based client given us opportunity to get lead position as Hand Cleaners exporters……

Truck Wash Brightenermore_vert

Read More arrow_forward

bookmark Truck Wash Brightenerclose

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.
Can be applied by brushing or high pressure spray wash.
Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.
Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.
Do not permit solution to dry on surface, rinse completely and preferably by …..