RXSOL Silica Sol 30%more_vert

Read More arrow_forward

bookmark RXSOL Silica Sol 30%close

Silica Sol has many applications for paper, fibers, steel and catalysts. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Without the development of chemicals such as Silica Sol, the electronics industry would not be where it is today. Silica Sol comes in a variety of types to suit your needs…..

Silica Sol RXmore_vert

Read More arrow_forward

bookmark Silica Sol RXclose

Particles and Surface State

Silica Sol made by growing mono-dispersed, negatively charged, amorphous silica particles in water. OH ions exist at the surface of the particles with an electric double layer formed by alkali ions. Stabilization is achieved by the repulsion between the same negatively charged particles. Disturbance of the charge balance will cause the Silica Sol to aggregate, resulting in high viscosity or gelation of the solution.

Stability

Effects of pH change

The higher …..

Zirconmore_vert

Read More arrow_forward

bookmark Zirconclose

Zircon's exceptional qualities of hardness and durability makes it a must-use for the manufacture of ceramics and refractory tiles and also for a range of other high-tech applications such as armour plating on military aircraft, heat shield in space shuttles and potentially as solid oxide fuel cells in hydrogen powered vehicles and in many industrial and chemical applications. Owing to its chemical inertness, very low heat conductivity, high specific gravity, low expansion, good resistance to ab…..

ACID Slurry LABSA 96 to 98 60 Kgmore_vert

Read More arrow_forward

bookmark ACID Slurry LABSA 96 to 98 60 Kgclose

USAGE of LABSA: The product can be used as the raw material to produce kinds of detergent, emulsion such as laundry powder, dish wash cleaner in daily chemical industrial.
CHARACTERISTIC : Our products has high action of detergency, moistening, Foaming, emulsion. It is brown viscous fluid in appearance with acidity and strong absorbency. Packing Details: 210KG Net Plastic Drum or according to customers' requirements…..

Corrosion Inhibitormore_vert

Read More arrow_forward

bookmark Corrosion Inhibitorclose

Storage and Disposal

Acid corrosion Inhibitor RXSOL-16-1047-210 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-210 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-210  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

…..

Aqua Break RX 20 Ltrmore_vert

Read More arrow_forward

bookmark Aqua Break RX 20 Ltrclose

WHY RXSOL-16-3003-020 is better ?

An economical  highly concentrated product.
Compatible with oily water separators.
Releasing the oil phase for reclamation.
Suitable for all types of floors. Deodorizing nature.
Eliminates the need to buy & stock duplicate products because of its effectiveness.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal
 …..

Aqua Break RX 25 Ltrsmore_vert

Read More arrow_forward

bookmark Aqua Break RX 25 Ltrsclose

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..

AQUA Tuff High Foam conc.more_vert

Read More arrow_forward

bookmark AQUA Tuff High Foam conc.close

Cleaning agents used in Aquatuff  for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..

Bentonite Soil Conditioning Agentmore_vert

Read More arrow_forward

bookmark Bentonite Soil Conditioning Agentclose

Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..

Bentonite Powdermore_vert

Read More arrow_forward

bookmark Bentonite Powderclose

Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..

Conductivity Powdermore_vert

Read More arrow_forward

bookmark Conductivity Powderclose

The specification is as below :-

 

Natural graphite – 20%

Sodium bentonite – 30%

Gypsum powder – 10%

Megnatite –  2%

Cadmium  – 10 ppm

Lead – 22 ppm

Mercury – 10 ppm

Chromium – 5 ppm

Monobromobyphenyle – 3 ppm

 

Electrical conductivity – 1 ohm

 

After making gel mixture with water ,  conductivity is below 1 ohm. …..

Natural Blue Biodegradable cleaner and Degreasermore_vert

Read More arrow_forward

bookmark Natural Blue Biodegradable cleaner and Degreaserclose

Storage and Handling :

Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container. Rx Marine International cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is…..

Methanol Water Mixmore_vert

Read More arrow_forward

bookmark Methanol Water Mixclose

Methanol Reformer Fuel Specification : The First Element Methanol Reformer fuel mixture is 66% Methanol / 33% Distilled Water on a volumetric basis. The mixture is prepared in a blend tank of suitable volume. The selected blend tank must be thoroughly cleaned and free of all contaminants. Ensure the mixture is sufficiently blended to produce a homogeneous mixture. …..

Hand Cleaner Paste, Waterless 1 Kg Pkgmore_vert

Read More arrow_forward

bookmark Hand Cleaner Paste, Waterless 1 Kg Pkgclose

Avoid contact with wounded skin
Super tough premium industrial waterless hand cleaner gel , uses orange / lemon  peel extract , effectively remove wet paint, printing inks, greases, Oil, Adhesives, grime, Carbon black, glue and several other to remove most stubborn Hand cleaner manufacturer and exporter from India , for Wholesaler and Trader  Greaseless, waterless hand cleaner. ; Fresh orange / lemon scent; Contains no petroleum distillates to dry out skin Hand Cleaner Gel is not flammable and…..

Truck Wash Brightenermore_vert

Read More arrow_forward

bookmark Truck Wash Brightenerclose

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.
Can be applied by brushing or high pressure spray wash.
Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.
Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.
Do not permit solution to dry on surface, rinse completely and preferably by …..

Ultrasonic Bath Universal Cleanermore_vert

Read More arrow_forward

bookmark Ultrasonic Bath Universal Cleanerclose

As the name this is universal cleaner and suitable for claening of equipments, tools, surface etc. Make sure the surface of objects is completely immersed. Hollow objects have to be immersed in a way that air can completely escape from the cavities. Concentration and time of application depend on type and degree of contamination. After cleaning, rinse parts thoroughly with water. For spotless drying, rinse with demineralised water. Respirators (face masks) and protective work equipment have to…..

FORE and AFTmore_vert

Read More arrow_forward

bookmark FORE and AFTclose

For cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. These two steps are followed:
High Molecular mixture of CATIONIC and ANIONIC surfactant, to react with all oil and grease molecule
 

Step

1:

Spray directly on area to be cleaned

Step

2:

With high-pressure clean entire emulsified area

Due to high emulsification & penetration objects achieves optimal cleaning results.
Due to repulsion activity fore aft-Rx preventing dirt from reformin…..