Corrosion Inhibitor for metal RUST Preventivemore_vert

Read More arrow_forward

bookmark Corrosion Inhibitor for metal RUST Preventiveclose

FEATURES & BENEFITS
VERSATILE:
Corrosion Inhibitor for metal RUST Preventive   rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.

Corrosion Inhibitor for metal RUST Prevantive  is applied with in-process spray or dip tank application where fluid run-off is collected for reuse; water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom. 

Corrosion In…..

Acid corrosion Inhibitor RXSOL 213more_vert

Read More arrow_forward

bookmark Acid corrosion Inhibitor RXSOL 213close

Storage and Disposal

Acid corrosion Inhibitor RXSOL 213 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL 213 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL 213  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

Disposal information f…..

Corrosion Inhibitor 25 Ltrmore_vert

Read More arrow_forward

bookmark Corrosion Inhibitor 25 Ltrclose

Storage and Disposal

Acid corrosion Inhibitor RXSOL-16-1047-025 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-025 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-025  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

…..

Corrosion inhibitor, closed cooling systems – molybdate/phosphonatemore_vert

Read More arrow_forward

bookmark Corrosion inhibitor, closed cooling systems – molybdate/phosphonateclose

This product can be use with other cooling watertreatment chemicals as it contains with special buffer agent which protect further chemical reaction with other chemicals.

 

We have other suitable product also for controlling of corrosion in cooling water system… 

Rocor NB Liq Corrosion Scale Inhibitor ( COOLING WATER CORROSION & SCALE INHIBITOR )
Corrosion Inhibitor for Water Systems  having  unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non …..

Corrosion Inhibitormore_vert

Read More arrow_forward

bookmark Corrosion Inhibitorclose

Storage and Disposal

Acid corrosion Inhibitor RXSOL-16-1047-210 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-210 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-210  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

…..

Aqua Break RX 20 Ltrmore_vert

Read More arrow_forward

bookmark Aqua Break RX 20 Ltrclose

WHY RXSOL-16-3003-020 is better ?

An economical  highly concentrated product.
Compatible with oily water separators.
Releasing the oil phase for reclamation.
Suitable for all types of floors. Deodorizing nature.
Eliminates the need to buy & stock duplicate products because of its effectiveness.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal
 …..

Aqua Break RX 25 Ltrsmore_vert

Read More arrow_forward

bookmark Aqua Break RX 25 Ltrsclose

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..

AQUA Tuff High Foam conc.more_vert

Read More arrow_forward

bookmark AQUA Tuff High Foam conc.close

Cleaning agents used in Aquatuff  for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..

HEDP 60%more_vert

Read More arrow_forward

bookmark HEDP 60%close

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very stro…..

Hydrocarbon Remover Hcfmore_vert

Read More arrow_forward

bookmark Hydrocarbon Remover Hcfclose

Using Procedure:-

First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2008-HCF is by direct injection followed by recirculation washing, using tank cleaning machines.

Spraying Method:- 

Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at lea…..

Slip Coat RXSOL HOLD BLOCK 50 Ltrmore_vert

Read More arrow_forward

bookmark Slip Coat RXSOL HOLD BLOCK 50 Ltrclose

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                       2 > Newly Painted surface should be fully cured.

 

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can…..

Bentonite Powdermore_vert

Read More arrow_forward

bookmark Bentonite Powderclose

Bentonite can be Broadely classified in 2 grades :
 
Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.
 
Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped throug…..

Natural Blue Biodegradable cleaner and Degreasermore_vert

Read More arrow_forward

bookmark Natural Blue Biodegradable cleaner and Degreaserclose

Storage and Handling :

Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container. Rx Marine International cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is…..