Alkalinity Control 20 Ltrsmore_vert

Read More arrow_forward

bookmark Alkalinity Control 20 Ltrsclose

It can also be used as a neutralizing agent following acid cleaning with  descaling materials ( RXSOL-11-1008–DC descaling Liq / RXSOL-54-1008-SA Safe Acid PWD ) 

CHARACTERISTICS

Alkalinity balace mechnism to control corrosion.

It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown. Treated as good salt-scale controler product.

Compatible with other BOILER chemicals

Tested with long and continious running plant for more then 20 Years and …..

A. Guide Line Manual for Boilermore_vert

Read More arrow_forward

bookmark A. Guide Line Manual for Boilerclose

Chemical Treatments for Waterside of Boiler Tubes

The feedwater is composed of makeup water (usually city water from outside boiler room/ process) and condensate (condensed steam returning to the boiler). The feedwater normally contains impurities, which can cause deposits and other related problems inside the boiler. Common impurities in water include alkalinity, silica, iron, dissolved oxygen and calcium and magnesium (hardness). Blowdown, a periodic or continuous water removal process, i…..

Alkalinity Control 25 Ltrsmore_vert

Read More arrow_forward

bookmark Alkalinity Control 25 Ltrsclose

It can also be used as a neutralizing agent following acid cleaning with  descaling materials ( RXSOL-11-1008–DC descaling Liq / RXSOL-54-1008-SA Safe Acid PWD ) 
 

CHARACTERISTICS

Alkalinity balace mechnism to control corrosion.

It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown. Treated as good salt-scale controler product.

Compatible with other BOILER chemicals

Tested with long and continious running plant for more then 20 Years a…..

Air Cooler Cleaner ACC-009more_vert

Read More arrow_forward

bookmark Air Cooler Cleaner ACC-009close

3 to 5 litres of cleaning solution per square meter or as table below:

Engine HP.

Solution of 10 to 25% RXSOL-16-1049-020

6,000 to 12,000

2 to 3 litre

12,000 to 24,000

4 to 5 litre

24,000 or  more

6 litre

NOTE :
For cleaning of Air cooler and Air side of  turbochargers, a  solution  of  5 – 25% RXSOL-16-0009-ACC in fresh  water is recommended. Inject the solution for 10-15minutes, then similar quantity of fresh water injected to rinse off em…..

Aqua Break RX 20 Ltrmore_vert

Read More arrow_forward

bookmark Aqua Break RX 20 Ltrclose

WHY RXSOL-16-3003-020 is better ?

An economical  highly concentrated product.
Compatible with oily water separators.
Releasing the oil phase for reclamation.
Suitable for all types of floors. Deodorizing nature.
Eliminates the need to buy & stock duplicate products because of its effectiveness.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal
 …..

Aqua Break RX 25 Ltrsmore_vert

Read More arrow_forward

bookmark Aqua Break RX 25 Ltrsclose

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1…..

AQUA Tuff High Foam conc.more_vert

Read More arrow_forward

bookmark AQUA Tuff High Foam conc.close

Cleaning agents used in Aquatuff  for hold cleaning solution is fully biodegradable and not be harmful to the marine.  Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.
Heavy Soil deposit…..

Sulfamic Acid Descaler Cleanermore_vert

Read More arrow_forward

bookmark Sulfamic Acid Descaler Cleanerclose

Packing of Sulphamic acid ( NH2SO3H or H3NO3S )

Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request. 
Advantages of using Sulphamic Acid

Sulphamic Acid has very high shelf life.

Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.

Sulphamic acid has very high effectivity of the descaling.

Complete cleaning can be chemically achieved by Sulphamic acid and does not r…..

Toluene AR grademore_vert

Read More arrow_forward

bookmark Toluene AR gradeclose

 

PRODUCT SPECIFICATIONS  

       LIMITS TYPICAL LOT ANALYSIS

Assay (GC), min

99.7%

99.97%

Color (APHA), max  

10  

5

Appearance

Clear

Clear

Res. After Evap, max

10 ppm

<10 ppm Substance Darkened by H2SO4 To Pass Pass Sulfur Comp. (as S) max 1ppm <1ppm Water, max 0.03% 0.01% Boiling Range.....

Oxygen Scavangermore_vert

Read More arrow_forward

bookmark Oxygen Scavangerclose

Always mix 5006 with fresh DI water or softened water . On complete dissolution of the product 5006  may be mixed with most boiler chemicals used for boiler treatment.  Its dosing pumps, piping and valves should be made of stainless steel, polyethylene, or PVC.

Control of  Dose:- RXSOL 5006 dose  is normally controlled by a RXSOL SULFITE test on the boiler water……

Oxygen Scavanger PWD 25 Kgmore_vert

Read More arrow_forward

bookmark Oxygen Scavanger PWD 25 Kgclose

TEST METHOD ::: http://rxmarine.com/hydrazine-test-kit

 

HANDLING, STORAGE AND PRECAUTIONS :

RXSOL-40-5023-210 is mildly alkaline in nature. Normal precautions should be taken while handling solid powders. In case of contact, wash with water. Do not swallow.

RXSOL-40-5023-210 should be stored in a dry condition. Close the container tightly to avoid contact with air.

PACKING :

RXSOL-40-5023-210 is available in 50 kg polythene lined bags……

pH Booster Morpholine Basemore_vert

Read More arrow_forward

bookmark pH Booster Morpholine Baseclose

Key Features & Benefits:-

Minimizes corrosion of feed water tank, lines and pump

Imparts water and sludge conditioning to minimize scaling and deposition

Compatible with other treatment Chmicals

Completely biodegradable chemicals
Its antiscale property helps and Prevent from Scaling

Minimum downtime required for descaling
Multipurpose,therefore easy to use
Proper maintenance of boiler saves Power / Fuel saving upto 70%. Formation of Scale is major issue and contol of scale makes E…..

Potable Water Stabilizer (Liquid) FRESH WATERmore_vert

Read More arrow_forward

bookmark Potable Water Stabilizer (Liquid) FRESH WATERclose

Dosing and Control
Potable Water Stabiliser Liquid is non corrosive to ordinary metals used in feeding equipment and may be fed with a simple by-pass feeder or suitable chemical dosing pump. Typical dosage rate is 15 to 25mls/m3 water. or The initial recommended dosage is 750 to 1.5  liter per 20 tonnes of water. This provides a level of 12 ppm of phosphate salts.
The product can be injected into the discharge lines of the fresh water generator or directly into the fresh water pumps%u2019 suction…..

Potable Water Test Kitmore_vert

Read More arrow_forward

bookmark Potable Water Test Kitclose

 

Features

%u2022 pH Tester and Buffer Kit
%u2022 Chlorine Ampoule Test Kit, including color comparator
%u2022 Coliform Test Kit, including UV lamp and safety goggles
%u2022 Convenient Carrying Case

Benefits

%u2022 Monitors pH level of drinking water to ensure pH level supports chlorination.
%u2022 Monitors the level of free chlorine in the drinking water.
%u2022 Monitors presence/absence of total coliforms and E.coli.
%u2022 Provides for safety of crew
…..