RXSOL-12-1501-020 : is a superior & powerful alkaline buffer cleaner containing corrosion inhibitors toprevent the corrosion of metals . It is an exceptional solvency power on soiled & oily matter with good foaming qualities . It is free from hydrocarbon solvent , bio-degradable and minimizes the extreme hazards to personnel while handling materials . Can be used for all types of cleaning and degreasing and may be applied by brush , handspray , high and low pressure washing machines etc. Leave surface residue free.
RXSOL-12-1501-AP-210 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals.It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities.It is free from Hydrocarbon solvents,Biodegradable and minimizes the extreme hazards to personnel in handling materials Applications RXSOL-12-1501-AP-210 Suitable for cleaning engine components like fuel and Lube oil filters,Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces,such as Decks,Tanks,Engine-rooms,etc.can be used for all types of cleaning and degreasing and may be applied by brush,handspray,high and low pressure washing machines etc.Directions for Use and Dose Rates General Cleaning
RXSOL-12-1501-AP-210 can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc.Time necessary for cleaning depends on the nature and thickness of the deposits.20-30 min.will suffice for most applications.Hardened,carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage.If allowed to cool,the degassing procedure must be repeated. Depending on degree of contaminatio
RXSOL-12-1501-AP-210 should be mixed with warm water at a rate of 50-200 ml per 10 litres.i.e.1cup of RXSOL-12-1501-AP-210 to a bucket of water. RXSOL-12-1501-AP-210 solution can be applied simply by mops, brushes or rags,or by dipping the soiled articles into the Rx RXSOL-15-1501-tech solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties,RXSOL-12-1501-AP-210 is not recommended for washing machines. Tank Cleaning Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
An all purpose liquid cleaner with grease-cutting formula for cleaning greasy kitchen dirt. Use diluted or at full strength.
For cleaning engine parts like fuel and lube oil filters , injection nozzles , pump parts , inlet and exhaust valves and cleaning of hard surfaces , such as deck , tanks , engine – rooms , etc
The Importance of RXSOL-12-1501-AP-25 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-12-1501-AP-25 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1 : Spraying the RXSOL-12-1501-AP-25 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-12-1501-AP-25 has been sprayed on the surface and before
The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL-12-1501-AP-25 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-12-1501-AP-25 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-12-1501-AP-25 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-12-1501-AP-25 on dry surface where possible!A dry surface will absorb far better than a wet surface.When applying RXSOL-12-1501-AP-25 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-12-1501-AP-25 may produce ‘channels’ down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-12-1501-AP-25 will give the best effect.
Depending on contamination 50 – 200 ml per 10 litrs of water . i. e. 200 mol to a bucket of water .
Method of Application and Dose Rates:
1.Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
2.Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
3.Spot cleaning. Hand spray neat or diluted with up to
4.Five parts water and leave for several minutes before rinsing off with clean water.Cleaning of Cargo Tanks to
remove Soot from Inert Gas Systems.
5.Spray RXSOL-12-1501-AP-210 on with a high pressure cleaning machine and use1:6 with water.If used with hand
sprayer,spray the product neat onto the surface,allowing1 lit.for every12 m2.Use a5-8%solution in a tank
6.Leave for about 30-45 minutes.The surface should be kept wet.
7.Wash down with hot water (80°C) and check the cargo tank
8.Repeat the procedure if necessary.
Note: Whenever possible,the cleaning solution should be heated to 60-80°C.If this method is not possible,other conventional methods such as separate rate direct injection,recirulation or hand spraying provide acceptable options.For boiler fire side cleaning,a 10-20 % hot solution, (temp.above 40°C),should be sprayed on to the surfaces to be cleaned.Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary
|Appearance||Pale yellow liquid|
|Density||In g/cm3 at 15°C: 1.01|
|Compatibility Metal||No known effect|
|Rubber||No known effect|
|PACKAGING||RXSOL-12-1501-AP||Size (in Litres) 25, 35|
%u2022 Removes grease, oil, carbon deposits, soil and grime.
%u2022 Keeps loosened deposits in suspension preventing re-deposition.
%u2022 Low toxic.
%u2022 Free from hydrocarbon solvents.
%u2022 Effective and economical in use
%u2022 Water-based cleaner.
%u2022 RXSOL-12-1501-AP-210 has numerous cleaning applications including removal of greases, waxes,
oil, sludge, soot, carbon deposits and general dirt and grime.
%u2022 Non-corrosive to ferrous metals.
%u2022 Suitable for all tank-coatings.
%u2022 Can be used for gas and hydrocarbon freeing of tanks.
%u2022 Can be used for deodorizing
%u2022 Contains wetting agents.
%u2022 Leaves surfaces residue free. Page 2 of 3 : 3 :
%u2022 Acceptable for use in food areas.
%u2022 Suitable for accommodation cleaning of woodwork, leather, desks, etc.
%u2022 Suitable for cleaning of toilets and showers.
%u2022 Suitable for cleaning of reefer boxes.
%u2022 Can be used for cleaning of windows and portholes.
%u2022 Can be used for cleaning of dishes.
%u2022 Can be used for cleaning of hospitals.
%u2022 Can be used for hand laundry cleaning.
Note: This article uses material from the http://rxmarine.com/