It is a powerful solvent emulsion cleaner for cleaning of diesel engine air coolers, scavenging air systems and compressor. ACC-009 is a liquid compound consisting of specific corrosion inhibitors , to prtect SOFT METAL
ACC9 is concentrate solvent based water soluble emulsion cleaner for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.
ACC-009 is specified marine and oil field cleaning chemicals to maintain diesel engine charge Air cooler with full work efficiency. ACC9 emulsifie all types of oil-soiled and effectively removes clean all types of contaminants. ACC9 is fully developed new generationg product with anti corrosive properties emulsifier and inhibitors to dissolves accumulated deposits.
ACC9 is watersoluble product and classified as best AIR Cooler Cleaner for shipping and marine industries. We are working with this product since 1995 and on our daily routine cleaning operation given us opprtunity to select non corrosive solvent to formulate ACC9 along with powerful new genration emulsifier, detergent and inhibitors. When ACC9 spread on greasy soiled parts, ACC9 chemically penetrate inside the soiled area and finally resulting with emulsifying action with water. This cleaning concept help to removes all soiled greasy part without mechanical rubbing and friction action. As manual scrapping and rubbing cleaning action directly damaging the surface area of metal parts. This is the reason why engineer always have suggestion to avoid mechanical rubbing cleaning procedure.
Atleast for 2 Hrs deep COOLER PARTS in to AIR COOLER CLEANER emulsion tank. The product should be heated to approx. 50°C and agitation provided with an air line. Then drain off and flush well with water, followed by drying with an air line.
Soak method: Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then allow deposits to. Be broken down and loosened before removal, then rinse .
Some designs of cooler can be circulated ‘in situ’. In this case a pump tank and pipe system is fitted permanently or connections are provided for connecting a temporary circuit. The system should be filled with AIR COOLER CLEANER circulation carried out for 2 – 4 hours at a temperature of upto 50°C. After cleaning the cooler should be thoroughly flushed with fresh water and dried with an air line.
Note: Both cleaning methods benefit from heat of up to 50°C and cleaning times can be reduced or extended dependant on temperature and degree of fouling.
Hand spray Cleaning: By Hand spray,apply concentrate RXSOL-16-0009-210 all over the cooler coils. for good emulsification & penetration. Allow the RXSOL-16-0009-210 for a minimum of 1 hour,then use a high pressuure water to wash off the loosened deposits. During process always keep drain valve open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be stopped.
ACC9 supplier and stockist in Mumbai – Navi Mumbai MIDC, Maharastra, Surat – Hazira, Kandla – Gandhidham, Mundra – Gujrat, Manglore – Goa, Visakhapatnam – Gangavaram – Kakinada, Chennai – Ennore, Kolkata – Haldia – Paradip, Fujairah – Dubai – Sharjah.
During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit , which will affect cooler efficiency and damage the system. AIR COOLER CLEANER ACC 9 is specialized and concentrated product which is effectively cleans diesele engine change air cooler whether it is ‘ MANUAL or IN SERVICE.
For effective cleaning of air coolers, scavenging air systems and turbo chargers of diesel engines.
3 to 5 litres of cleaning solution per square meter or as table below:
Engine HP. Solution of RXSOL 009
6,000 to 12,000 2 to 3 litre
12,000 to 24,000 4 to 5 litre
24,000 or more 5 to 6 litre
In General : Depending upon contamination 10-25% with fresh water.
OPTIONAL : Dependant on design, the cooler is flooded with AIR COOLER CLEANER immersed in a tank full of product.
Field :: – AHU, FCU, Air Conditioners, Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc.
It has self foaming characteristics which starts immediate foaming when it comes in contact with dirt, enabling excellent penetration of the product into the coils for complete cleaning that instantly shows multiple increase of CFM/Air Velocity.
Note: This article uses material from the http://rxmarine.com/